3 Slab Jacking Contractors in Clovis, NM

Intense seasonal rains saturate dry soil suddenly, causing rapid expansion that pushes slabs upward before the ground settles back. Fill dirt used in master-planned communities often compresses unevenly, creating settlement pockets under driveways and patios. Driveway cracks running parallel to the garage are a classic sign of expansive soil movement, and the slabs on either side often settle at different rates. If your slab has dropped less than a couple of inches, concrete leveling can restore it in a single visit for a fraction of what a full replacement would cost.

Two methods handle the concrete settlement common in Clovis: polyurethane foam injection and mudjacking. Foam injection is the more common choice for residential projects because the lightweight material performs well in the expansive soil conditions common in New Mexico. Small holes drilled through the slab allow foam to expand, fill voids, and raise the concrete to grade in a single visit, with the area ready for use the same day. Mudjacking uses a heavier cement slurry through larger holes at a lower cost, but requires 24 to 48 hours to cure.

Concrete leveling in the Clovis area runs $500 to $2,200 for typical residential projects. Foam injection costs $5 to $15 per square foot; mudjacking costs $3 to $7 per square foot. A one- or two-panel repair often falls between $300 and $400. Projects covering a full driveway or several settlement areas cost more. New Mexico's climate allows year-round scheduling, with spring and fall typically offering the best working conditions and the widest contractor availability.

Slab jacking lifts settled concrete back into place by pumping material beneath the slab through small drilled holes. The two main approaches are mudjacking (cement slurry) and polyurethane foam injection. Most residential slab jacking jobs cost $3 to $10 per square foot and can be completed in a few hours. Because the original slab stays in place, there's no demolition, no haul-away, and far less disruption to your property.

Expansive clay soils throughout the Southwest shrink and crack during long dry periods. Concrete settles when soil moisture drops, pulling away from the slab above and leaving unsupported voids. In Clovis, many homeowners schedule inspections before peak season to get faster turnaround times. New Mexico sits in the southwest region, so weather patterns can influence project timing.

Concrete that has settled unevenly puts stress on the slab itself. Slabs are designed to sit on a uniform surface, and when part of the support underneath shifts, cracking follows. In Clovis, this progression can turn a simple leveling job into a more expensive repair if left alone. New Mexico homeowners who catch settlement early typically avoid the need for full slab replacement.

Catching settlement early keeps the repair simple. In Clovis, most slab jacking jobs wrap up in a few hours, with minimal disruption to your daily routine.

• Confirm each provider actively serves Clovis and handles slab jacking projects like yours.
• Ask for a written scope that lists method, timeline, cleanup, and warranty terms.
• Verify license and insurance claims directly with the contractor and your local authority.
• Get at least two itemized estimates so you can compare scope and price side by side.
• With 3 local contractors listed, prioritize clear communication and complete scopes, not only the lowest bid.